This update of the venerable ATN3600L conical bonded stylus, which has sold by the millions and been trusted by countless music lovers for more than 50 years, features a new modern design while retaining the ease-of-use, reliability, and sound quality that have made it the replacement stylus for so many turntables. The 0.6 mil conical stylus ensures proper contact with the record groove even when the cartridge is not quite level.
Stylus Shape: Conical
Stylus Dimension: 0.6 mil
Stylus Life: Approx. 300–500 hours
Compatible Turntables
Audio-Technica turntables: AT-LP60X series, AT-LP60 series, AT-LP2D series, AT-PL300 series, AT-SB727, AT-SB2022, AT-LPGO-BT, AT-PL50.
Other brands: Consult the turntable’s user manual or contact the manufacturer.
To remove old stylus (needle), hold the cartridge in one hand, grasp the plastic stylus housing with thumb and forefinger, and pull away from the cartridge. The stylus assembly comes away at a slight angle, as indicated by the arrow.
To install replacement stylus, insert the new stylus assembly into the cartridge at a slight angle, so the hook at the end of the stylus fits into the slot in the cartridge body. The stylus assembly should click into place when fully seated on the cartridge. The stylus must be fully seated on the body for proper operation.
—> Return to Stylus & Cartridge Range 2025 <—
Replacement stylus for Audio-Technica AT3600L cartridge.
Stylus Shape: Conical
Stylus Dimension: 0.6 mil
To remove old stylus (needle), hold the cartridge in one hand, grasp the plastic stylus housing with thumb and forefinger, and pull away from the cartridge. The stylus assembly comes away at a slight angle, as indicated by the arrow.
To install replacement stylus, insert the new stylus assembly into the cartridge at a slight angle, so the hook at the end of the stylus fits into the slot in the cartridge body. The stylus assembly should click into place when fully seated on the cartridge. The stylus must be fully seated on the body for proper operation.
Audio-Technica has been perfecting the art of transducer technology since our first hand-crafted phono cartridge in 1962.
—> Return to Stylus & Cartridge Range 2025 <—
The AT-LT10 is a universal ½”-mount headshell for 4-pin turntable cartridges with or without threaded inserts. The headshell’s elongated through holes allow cartridges to be precisely positioned to achieve proper overhang and effective tonearm length. The lightweight aluminum die-cast body keeps vibration to a bare minimum and the slip-resistant finger lift enables precise stylus placement. The AT-LT10 is equipped with OFC (oxygen-free copper) lead wires and comes with mounting screws.
—> Return to Stylus & Cartridge Range 2025 <—
The AT-HS4BK is a universal ½”-mount headshell designed for use with straight 4-pin tonearms. The AT-HS4BK features an ultra-lightweight (8.5 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with color-coded lead wires and comes with mounting screws.
Available in black (AT-HS4BK) and silver (AT-HS4SV).
Specifications
Material: Aluminum
Connector: Aluminum
Weight: 8.5 g (0.3 oz), including lead wire
Dimensions: 12.5 mm (0.5″) H × 20.7 mm (0.8″) W × 54.0 mm (2.1″) D
Accessories: Installation screws (10 mm × 2, 8 mm × 2), nuts x 2, plastic washers x 2
—> Return to Stylus & Cartridge Range 2025 <—
The lightweight aluminum AT-HS10BK is a universal ½”-mount headshell for 4-pin turntable cartridges. Featuring an aluminum die-cast body, the AT-HS10 is designed to keep vibration to the bare minimum. The finger lift is positioned near the front of headshell to enable precise placement of the stylus onto the record. The headshell is equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws. Available in black (AT-HS10BK) and silver (AT-HS10SV).
Specifications
Material: Aluminum
Connector: Aluminum
Weight: 10.0 g (0.4 oz), excluding lead wire
Dimensions: 13.7 mm (0.5″) H × 21.0 mm (0.8″) W × 52.0 mm (2.0″) D
Accessories: Installation screws (16 mm × 2, 10 mm × 2), Nuts x 2, Plastic washers x 2
—> Return to Stylus & Cartridge Range 2025 <—
This 0.6 mil conical cartridge fits P-mount turntables.
—> Return to Stylus & Cartridge Range 2025 <—
The AT618a disc stabilizer fits over the turntable spindle to hold records firmly in place, reducing resonance and improving sound quality. The stabilizer is constructed of machined brass with a protective rubber cover.
—> Return to Stylus & Cartridge Range 2025 <—
The AT615a high-precision bubble level is an indispensable tool for making horizontal adjustments during turntable setup. Features a machined aluminum housing.
—> Return to Stylus & Cartridge Range 2025 <—
Color-coded lead wires for connecting a phono cartridge to a headshell. 6N-OFCC 99.9999% high-purity oxygen-free copper; 0.12 mm x 29 core strand construction.
—> Return to Stylus & Cartridge Range 2025 <—
Designed to mount on a manual turntable, the AT6006R Safety Raiser automatically lifts the tonearm at the end of a record, protecting the stylus from damage. The raiser is equipped with a highly sensitive release antenna and a hydraulic lift with rubber lift bar, ensuring safe, smooth and dependable operation. Height adjustment knob and included spacers allow the raiser to be used with a wide variety of turntables with different tonearm heights.
Among Audio-Technica turntables, the AT6006R is compatible only with the AT-LP5, AT-LP5X and AT-LP7 (the positioning of the tonearm assembly on other A-T models prevents the use of the raiser).
Specifications
Dimensions: 14 mm (0.55″) diameter × 27 mm (1.06″) to 39 mm (1.54″) height*
Lift bar movable width: 3 mm (0.12″)
Weight: Approx. 21 g (0.74 oz)
Accessories: Double-sided tape ×4, Spacer ×2 (14 mm (0.55″) diameter × 12 mm (0.47″) height; 14 mm (0.55″) diameter × 24 mm (0.94″) height)
* In standby. Height can be adjusted by using the height-adjustment knob and included spacers.
—> Return to Stylus & Cartridge Range 2025 <—
